🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

AudioQuest Evergreen Jack to Phono RCA Analogue Interconnect Cables

Product image 1

AudioQuest Evergreen Jack to Phono RCA Analogue Interconnect Cables

The Evergreen 3.5mm to RCA cable has 100% shield coverage by virtue of AudioQuest's Noise-Dissipation System, and Foamed Polyethylene insulation on Solid Long-Grain Copper conductors working together to reduce distortion. This gives the Evergreen cables a smooth clear and dynamic sound. This product comes factory-terminated with Cold-Welded gold-plated plugs.

The Evergreen Point Floating Bridge connects Seattle, Washington (USA) to the Bellevue area across Lake Washington. Since opening in 1963, its 2,285 meters (7,497 ft) makes it the longest floating bridge in the world. The structure includes 33 pre-stressed concrete pontoons averaging 110 meters (360 ft) long and 18 meters (60 ft) wide.

Features

ASYMMETRICAL DOUBLE-BALANCED GEOMETRY
Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
 
METAL-LAYER NOISE-DISSIPATION
It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
 
COLD-WELDED, GOLD-PLATED TERMINATIONS
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS
Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
 
FOAMED-POLYETHYLENE INSULATION
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.
  

Specifications:

Metal Solid Long-Grain Copper (LGC)
Geometry Asymmetrical Double-Balanced (Lower Impedance on Ground, Same Quality + and – Conductors)
Dielectric Foamed-Polyethylene
Noise-Dissipation Metal-Layer Noise-Dissipation
Jacket Green/Black Braid
Termination Cold-Welded, Gold-Plated

The Evergreen 3.5mm to RCA cable has 100% shield coverage by virtue of AudioQuest's Noise-Dissipation System, and Foamed Polyethylene insulation on Solid Long-Grain Copper conductors working together to reduce distortion. This gives the Evergreen cables a smooth clear and dynamic sound. This product comes factory-terminated with Cold-Welded gold-plated plugs.

The Evergreen Point Floating Bridge connects Seattle, Washington (USA) to the Bellevue area across Lake Washington. Since opening in 1963, its 2,285 meters (7,497 ft) makes it the longest floating bridge in the world. The structure includes 33 pre-stressed concrete pontoons averaging 110 meters (360 ft) long and 18 meters (60 ft) wide.

Features

ASYMMETRICAL DOUBLE-BALANCED GEOMETRY
Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
 
METAL-LAYER NOISE-DISSIPATION
It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
 
COLD-WELDED, GOLD-PLATED TERMINATIONS
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS
Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
 
FOAMED-POLYETHYLENE INSULATION
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.
  

Specifications:

Metal Solid Long-Grain Copper (LGC)
Geometry Asymmetrical Double-Balanced (Lower Impedance on Ground, Same Quality + and – Conductors)
Dielectric Foamed-Polyethylene
Noise-Dissipation Metal-Layer Noise-Dissipation
Jacket Green/Black Braid
Termination Cold-Welded, Gold-Plated
Select Size
From $26.83

Original: $89.44

-70%
AudioQuest Evergreen Jack to Phono RCA Analogue Interconnect Cables—

$89.44

$26.83

Description

The Evergreen 3.5mm to RCA cable has 100% shield coverage by virtue of AudioQuest's Noise-Dissipation System, and Foamed Polyethylene insulation on Solid Long-Grain Copper conductors working together to reduce distortion. This gives the Evergreen cables a smooth clear and dynamic sound. This product comes factory-terminated with Cold-Welded gold-plated plugs.

The Evergreen Point Floating Bridge connects Seattle, Washington (USA) to the Bellevue area across Lake Washington. Since opening in 1963, its 2,285 meters (7,497 ft) makes it the longest floating bridge in the world. The structure includes 33 pre-stressed concrete pontoons averaging 110 meters (360 ft) long and 18 meters (60 ft) wide.

Features

ASYMMETRICAL DOUBLE-BALANCED GEOMETRY
Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
 
METAL-LAYER NOISE-DISSIPATION
It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
 
COLD-WELDED, GOLD-PLATED TERMINATIONS
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS
Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
 
FOAMED-POLYETHYLENE INSULATION
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.
  

Specifications:

Metal Solid Long-Grain Copper (LGC)
Geometry Asymmetrical Double-Balanced (Lower Impedance on Ground, Same Quality + and – Conductors)
Dielectric Foamed-Polyethylene
Noise-Dissipation Metal-Layer Noise-Dissipation
Jacket Green/Black Braid
Termination Cold-Welded, Gold-Plated

You may also like

Thumbnail 1Thumbnail 2

Chord Clearway HDMI Cable 4K

$40.05

-70%
Thumbnail 1Thumbnail 2

Chord Clearway Digital Cable

$220.27

$66.08

-70%
Thumbnail 1Thumbnail 2

Chord C-USB Digital USB Audio Interconnect Cable

$132.16

$39.65

-70%
Thumbnail 1Thumbnail 2

Chord C-Digital Audio Interconnect Cable

$76.76

$23.03

-70%
Thumbnail 1Thumbnail 2

Audioquest Pearl 48 HDMI 8K-10K Cable

$45.32

$13.60

-70%
Thumbnail 1Thumbnail 2

Chord C-Lite Digital Optical Audio Interconnect Cable

$38.71

$11.61

-70%
Thumbnail 1Thumbnail 2

Audioquest Cinnamon 48 HDMI 8K-10K Cable

$172.21

$51.66

-70%
Thumbnail 1Thumbnail 2

Audioquest Vodka 48 HDMI 8K-10K Cable

$332.41

$99.72

-70%
Thumbnail 1Thumbnail 2

Chord Shawline USB Digital Audio Interconnect Cables

$265.66

$79.70

-70%
Thumbnail 1Thumbnail 2

Audioquest Forest 48 HDMI 8K-10K Cable

$78.76

$23.63

-70%
Thumbnail 1Thumbnail 2

Audioquest Carbon 48 HDMI 8K-10K Cable

$198.91

$59.67

-70%
Thumbnail 1Thumbnail 2

AudioQuest NRG-Z3 UK AC Power Cable

$332.41

$99.72